Honeywell SPZ-8000 Pilot's Manual page 48

GSPD/TTG (Groundspeed/Time--To--Go) Button -- GSPD/TTG
D
is displayed in the lower right corner of the EHSI. Pushing the
GSPD/TTG button toggles the display between GSPD and TTG.
ET (Elapsed Time) Button -- Pushing the ET button displays
D
elapsed time in place of the GS/TTG display. Pushing the ET button
repeatedly
RESET--START--STOP--RESET.
V/L (VOR/Localizer) Button -- Pushing the V/L button displays
D
VOR/LOC information on the EHSI. This information is also sent to
the flight guidance computer. The power--up display is the on--side
NAV source. The V/L button is also used to activate the preselected
course feature.
FMS (Flight Management System) Button -- Pushing the FMS
D
button displays FMS information on the EHSI. The power--up
display is the on--side FMS.
For aircraft serial No. 5087 and later, LASERTRAK
displayed by pushing the FMS button and an external
LASERTRAK
NOTES: 1. The
2. If NAV remains selected on the guidance panel, the
3. Deselecting the LASERTRAK
4. The IRS selected on the LASERTRAKr controller
A28--1146--055
REV 2
SPZ--8000 Digital Integrated Flight Control System
sequences the
select switch.
r
AFCS
LASERTRAK
mode should be selected for AFCS guidance.
AFCS follow FMS course guidance even though
the EHSI is displaying LASERTRAK
external select switch returns the EHSI to the
selected FMS.
determines which IRS supplies navigation data to
the EHSI.
elapsed time
cannot be
. When this data is displayed, HDG
r
Electronic Flight Instrument System (EFIS)
as follows:
information is
r
coupled to the
information.
r
by pushing the
r
4-3