Ehsi Map Mode With Fms Selected For Display; 38 Ehsi Map Format -- Fms Selected For Display - Honeywell SPZ-8000 Pilot's Manual

SPZ--8000 Digital Integrated Flight Control System
EHSI MAP MODE WITH FMS SELECTED FOR
DISPLAY
In the MAP mode, when FMS is selected for display, the normal ARC
course select display (pointer, scale, and deviation) is removed and
replaced as described below. Figure 4--38 shows the EHSI in the MAP
mode with the FMS selected for display.
EHSI Map Format -- FMS Selected for Display
A maximum of four FMS waypoints are displayed. The waypoint
D
identifier is displayed in
level altitude constraint is displayed in
symbol.
The FMS legs are displayed as lines connecting each waypoint to
D
the next one.
The deviation is displayed as a digital cross--track distance readout.
D
If a VOR bearing is selected for display while in an FMS mode, a
D
cyan NAVAID symbol is displayed with its appropriate number (1 or
2) at its geographic position. If the VOR symbol is out of MAP
range, a cyan
If a VOR bearing is selected for display and the station symbol is
D
collocated with an FMS waypoint, the waypoint symbol is displayed
with the VOR bearing number to the left in cyan.
Electronic Flight Instrument System (EFIS)
4-52
Figure 4--38
magenta
bearing pointer is displayed.
for the TO waypoint. The flight
cyan next to the waypoint
A28--1146--055
REV 2