Honeywell SPZ-8000 Pilot's Manual page 286

typical full compass display
presentations, 4-45
weather radar displays, 4-54
mode annunciator (WX and
NAV/WX formats only), 4-55
range ring and annunciator
(WX, MAP, and MAP/WX
modes only), 4-54
target alert annunciator (all
modes), 4-54
WX return display (WX and
MAP/WX formats only),
4-55
Enhanced ground proximity warning
system (EGPWS) (optional), 2-1 ,
D--1
color definitions, D--3
full system operation, D--1
dual weather radar
controllers, D--2
single weather radar
controller, D--2
terrain range control, D--2
terrain select on EHSI
displays, D--1
terrain select on the MFD,
D--1
limited system operation, D--3
terrain annunciators, D--3
test display, D--5
warning conditions, D--4
Enroute cruise, 4-17
Equipment list, 1-2
F
Failures, 4-32
EADI failure warning flags, 4-32
altitude preselect failure, 4-34
attitude failure, 4-33
cross--side data failure, 4-34
flight director failure, 4-33
glideslope failure, 4-35
A28--1146--055
REV 2
SPZ--8000 Digital Integrated Flight Control System
Index (cont)
EHSI failure warning flags, 4-61
Flight guidance computer, 7-1
Flight guidance controller, 6-2
ALT button, 6-2
AP button, 6-4
APP button, 6-3
BANK button, 6-3
BC button, 6-3
CAT 2 button, 6-3
CPL button, 6-4
FLC button, 6-2
HDG button, 6-2
M TRIM button, 6-4
NAV button, 6-3
STBY button, 6-3
VNAV button, 6-2
VS button, 6-2
YD button, 6-4
Flight guidance system (FGS)
flight fault summary, 9-8
typical problems, 9-3
Flight level change mode, 8-42
Flight management system (FMS),
2-6
steering, 8-14
indicated airspeed failure, 4-34
localizer failure, 4-35
radio altitude failure, 4-35
symbol generator internal
failure, 4-35
TCAS messages and failure
annunciators, 4-36
vertical speed (optional)
failure, 4-35
glideslope failure, 4-62
heading failure, 4-61
navigation source failure, 4-62
symbol generator internal
failure, 4-63
TCAS failure (optional), 4-63
combined vertical and lateral
mode problems, 9-8
lateral mode problems, 9-3
vertical mode problems, 9-6
Index
Index--5