Mfd Map Mode Flight Plan Displays; Map Mode With Waypoint Data - Honeywell SPZ-8000 Pilot's Manual

Range Rings -- Range rings are displayed to aid in the use of radar
D
returns and position of NAVAIDS. If the WX mode is selected, the
outer range ring is the compass card boundary and represents the
selected range on the radar. The range annunciator on the inner ring
represents one half the range setting of the weather radar. The
INC/DEC switch on the MFD controller increases or decreases on
the range if WX mode is not selected.
Airport Symbol and Identifier -- The airport symbol and letter
D
identification are added to the MAP display when the APT button on
the MFD controller is pushed.
Distance and Course to Designator Annunciators -- The
D
distance and course to the designator are displayed in the upper left
corner of the MFD.

MFD MAP Mode Flight Plan Displays

The flight plan can be displayed with waypoints, VOR data, airport data,
or any combination of the three. The same flight plan is shown in each
of the following drawings for ease of comparing the different information
on the three displays. Figure 5--5 shows the MFD MAP mode with
waypoint data displayed.
A28--1146--055
REV 2
SPZ--8000 Digital Integrated Flight Control System
SRP
0.5L
4:39
33. 3

MAP Mode with Waypoint Data

Figure 5--5
AD--58090@
Multifunction Display (MFD) System
5-11