Local Operation With A Single Button - Becker C01a Assembly And Operating Instructions Manual

Wiring
Only use a single button (normally open). Connect one button for each drive. The button
must not be operated during the first five seconds after the mains voltage has been
switched on.
Button commands
< 1 second
> 1 second
Double-tap < 1 second
Operation proceeds in this sequence: "Travel-Stop-Travel-in-the-opposite-direction-Stop".

Local operation with a single button

L
N
PE
Button (normally open)
Moves in maintained operation
Moves in dead-man mode
Moves to the intermediate position (in alternation if both are programmed)
21