First Operation - Becker C01a Assembly And Operating Instructions Manual

Explanation of symbols
Attention
The tubular drives are designed for short-time operation. An inbuilt thermal protection
switch prevents overheating of the tubular drive. During commissioning (long drop dis-
tance or long running time), the thermoswitch may trigger. The drive will switch off. After a
short cooling-down period, the system is ready for operation again.
The drive does not achieve its full duty cycle until it has cooled to ambient temperature.
Avoid a situation where the thermal protection switch cuts in repeatedly.
230V AC / 50 Hz
1
N
2
L1
4
PE
1 = blue 3 = black
2 = brown 4 = green-yellow
If several tubular drives are to be connected in parallel, you can deactivate the program-
ming mode on one tubular drive by switching the radio switch to the outside position after
turning the power on.
12

First operation

UP button
STOP button
DOWN button
Programming button
The tubular drive clicks to confirm
(One or more times)
The tubular drive shifts to confirm
(One or more times)
1 = direction switch
2 = radio switch
Connecting the tubular drive
Connect the tubular drive to the power supply.
1
2
3
4
Readying the tubular drive for programming
Readying the tubular drive for programming by switching on the power
▻ Switch on the power.
► The tubular drive is ready to programme for 3 minutes