Figure 3-12 Paper Low Sensor; Table 3-2 Print Button Description - Microcom 428LT Operator's Manual

Chapter 3
3.8 Print Button and Status Indicator Light
The Print Button and the Status Indicator Light are used to identify and perform many
functions. This section provides a description to familiarize you with the basic function of
the Print Button and the Status Indicator Light.
3.8.1 Print Button
Operation
Printing a label
Pause printing
Feeding labels
(Line feed)
428LT Operator's Manual - 880040-0200
Paper Low
Sensor

Figure 3-12 Paper Low Sensor

Press the Print Button while the printer is IDLE or PAUSED to
reprint the last label.
A power up label will print after a power ON cycle when the Print
Button is pressed.
Press & hold the Print Button while the printer is printing to enter
the PAUSED mode.
Press the Print Button again to continue printing.
Press & hold the Print Button while the printer is IDLE to advance
label media. The printer will continue advancing label media until
the Print Button is released.
Table 3-2 Print Button Description
Description
Getting Started
3-9