Figure 3-11 Print Button And Status Light - Microcom 428LT Operator's Manual

Getting Started
10. Press the front panel button to execute a cut.
11. Rotate the top cover to the closed position.
3.7 Paper Low Sensor
The Model 428LT provides a sensor to detect paper low conditions. The sensor detects the
edge of the roll of media and when the sensor does not detect paper, the printer reports the
>INPUT 2< <CR> <LF> sequence.
This sensor is set to report the message when the signal is active low. This is controlled by
the ^D23 commands fourth position; xxx1xxxx.
3-8
PRINT BUTTON
and
STATUS LIGHT

Figure 3-11 Print Button and Status Light

428LT Operator's Manual - 880040-0200
Chapter 3