Microcom 428LT Operator's Manual page 203

^A ^D COMMAND
X 158 Set the Dot2Gap Value: This is the distance of the transmissive sensor, that
detects diecut and blow hole registration marks, to the dot row.
264 203dpi x28
284 203dpi x24m
380 300dpi x28
438 300dpi x24m
468 203dpi 224/424
720 300dpi 224/424
X 159 Brownout Reporting: Reports the number of recorded brownout conditions.
0 After a power up, reports the "running" total of detected Brownouts.
1 Clears the "running" total or volatile brownout count
5 Reports the non-volatile brownout count stored in memory
255 Clears the non-volatile brownout count stored in memory
164 Generate DataMatrix Barcode
166 Generate 4-State or USPS Imail Barcode
176 Generate Planet Code Barcode
12-20 428LT Operator's Manual - 880040-0200