Microcom 428LT Operator's Manual page 20

Getting Started
Figure 3-3
3.6 Loading Media
Loading media into the printer is an easy process. Follow the instructions below to properly
load the media.
1. Open the top cover.
2. Remove the media supply roller.
3. Install the roll of media on the media supply roller.
Rotate the Top Cover
to the open position
3-4
AUX Sensor Assembly; 040314-1100 pictured
Figure 3-4 Top Cover
Thumbscrew to adjust
media guides
428LT Operator's Manual - 880040-0200
Chapter 3