Defining Lacp Port - 3Com 3CBLSG48 User Manual

Defining LACP Port

LAG ports can contain different media types if the ports are operating
at the same speed. Aggregated links can be set up manually or auto-
matically established by enabling LACP on the relevant links. Aggregate
ports can be linked into link-aggregation port-groups. The LACP Port
Setup Page contains fields for modifying LACP LAGs.
1 Click Port > LACP > Port Setup. The LACP Port Setup Page opens.
Figure  LACP Port Setup Page
Status — Displays the administrative LACP function. The possible
field values are:
Disabled — Disables the LACP function on the selected ports.
Enabled — Enables the LACP function on the selected ports.
Port Priority — Displays the LACP priority value for the port.
The field range is 0-65535.
Select Ports — Displays the port number to which timeout and
priority values are assigned.
Select All — Allows the user to assign LACP status and port
priority to all ports.
Select None — Removes the ports selected.

Define the fields.
 Click Apply. Link Aggregation is modified, and the application
is updated.
C A P
HAPTER 7: GGREGATING
10
ORTS