Defining Lacp Priority - 3Com 3CBLSG48 User Manual

104 C A
HAPTER 7: GGREGATING
Defining LACP Prior-
ity
P
ORTS
Partner State — Displays inactive or active
Partner Oper Key — Displays the operational key value assigned
to the port by the link partner.
Group ID — Displays the group ID
LAG ports can contain different media types if the ports are operating
at the same speed. Aggregated links can be set up manually or
automatically established by enabling LACP on the relevant links.
Aggregate ports can be linked into link-aggregation port-groups. The
LACP Setup Page contains the field to configure the system priority.
1 Click Port > LACP > Setup. The LACP Setup Page opens.
Figure 1 LACP Setup Page
The LACP Setup Page contains the following field:
System priority— Specifies system priority value. The field
range is 0-65535. The field default is 32767.

Define the fields.
 Click Apply. Link Aggregation is modified, and the application is
updated.