Om Cli R Eference Uide; Getting Started With The Command Line Interface - 3Com 3CBLSG48 User Manual

E
Getting Started
with the Command
Line Interface
Console Port
Console Port
3C CLI
OM
This section describes using the Command line Interface (ClI) to
manage the device. The device is managed through the ClI from a
direct connection to the device console port.
Using the ClI, network managers enter configuration commands and
parameters to configure the device. Using the ClI is very similar to
entering commands on a UnIX system.
To start using the ClI via a console port:
1 Connect the RJ-45 cable to the Console port of the switch to the
serial port of the terminal or computer running the terminal
emulation application.
2
Set the baud rate to 38400.
3
Set the data format to 8 data bits, 1 stop bit, and no parity.
4 Set Flow Control to none.
5 Under Properties, select VT100 for Emulation mode.
6 Select Terminal keys for Function, Arrow, and Ctrl keys. Ensure
that the setting is for Terminal keys (not Windows keys).
logging on to the ClI: The login process requires a User name and
Password. The default user name for first time configuration is admin.
no password is required. User names and passwords are case sensitive.
To logon to the ClI Interface:
1 Press Enter without typing in a username. The Login prompt
displays:
Login:
2 Enter your User Name at The Login prompt.
R
EFERENCE
G
UIDE