160
C
C
HAPTER 13:
ONFIGURING
Q
O
S
UALITY
F
ERVICE
The Bandwidth Setup Page contains the following fields:
Ingress Rate Limit
Enable Ingress Rate Limit — Enables setting an Ingress Rate
Limit.
Ingress Rate Limit — Indicates the traffic limit for the port.
The possible field value is 128-500,032 kbits per second.
Egress Shaping Rate
Enable Egress Shaping Rate — Enables Egress Shaping Rates.
Committed Information Rate (CIR) — Defines CIR as the inter
face shaping type. The possible field value is 128-500,032 kbits per
second.
Committed Burst Size (CbS) — Defines CbS as the interface
shaping type. The possible field value is 64-131,072 kbits per
second.
Select ports — Indicates the ports to be configured.
Select All — Allows the user to assign the bandwidth settings to
all ports.
Select None — Removes the ports selected.
2
Select the ports to be configured.
3
Define the fields.
4
Click Apply. The bandwidth is defined, and the device is
updated.