Defining Snmp Communities - 3Com 3CBLSG48 User Manual

Defining SNMP
Communities
Access rights are managed by defining communities in the SNMP Com-
munities Setup Page. When the community names are changed, access
rights are also changed. SNMP communities are defined only for SNMP
v1 and SNMP v2c.
Monitor users have no access to this page.
To define SNMP communities:
1 Click Administration > SNMP > Communities > Setup. The
SNMP Communities Setup Page opens.
Figure 74 SNMP Communities Setup Page
The SNMP Communities Setup Page contains the following fields:
SNMP Status — Defines SNMP on the device. The possible field
values are:
Enabled — Enables SNMP on the device.
Disabled — Disables SNMP on the device.
■ Insert New Community — Adds a SNMP community string.
C C
HAPTER 12: ONFIGURING
S
143
NMP