Upgrade The Firmware Image - 3Com 3CBLSG48 User Manual

Upgrade the
Firmware Image
The Restore Image Page permits network managers to upgrade the
switch firmware.
note: The bootcode can only be upgraded using the Command line
Interface (ClI). See "Upgrading Software using the CLI".
The monitor user has no access to this page.
To download the software image:
1 Click Administration > Firmware Upgrade > Restore Image.
The Restore Image Page opens.
Figure 96 Restore Image Page
The Restore Image Page contains the following fields:
Download via TFTP — Enables initiating a download via the
TFTP server.
Download via HTTP — Enables initiating a download via the HTTP
client or HTTPS client.
TFTP Server IP Address — Specifies the TFTP Server IP Address
from which the image files are downloaded.
Source File Name — Specifies the image files to be downloaded.
2
Define the relevant fields.
3 Click Apply. The files are downloaded, and the device is updated.
C M S
HAPTER 14: AnAgIng YSTEM
F
173
IlES