Configuring System
Time
Define the fields.
Click Apply. The System Name is enabled, and the device is
updated.
4 Be sure to save your configuration, or the changes will be lost when
the switch is rebooted. To save the configuration, refer to "Saving the
Configuration" on page 31.
The System Time Setup Page contains fields for defining system time
parameters for the local hardware clock. Daylight Savings Time can be
enabled on the device.
Monitor users have limited permissions on this page.
Country specific times need to be added manually.
To configure the System Time:
1 Click Administration > System Time. The System Time Setup Page
opens.
Figure 4 System Time Setup Page
C
5
G
S
HAPTER
:
ENERAL
YSTEM
I
8
NFORMATION