3Com 3CBLSG48 User Manual page 165

154 C C
HAPTER 13: ONFIGURING
Q O S
UALITY F ERVICE
To configure CoS values to queues:
1 Click Device > QoS > CoS to Queue > Setup. The CoS to
Queue Setup Page opens.
Figure 82 CoS to Queue Setup Page
The CoS to Queue Setup Page contains the following fields:
Restore Defaults — Restores the device factory defaults for
mapping CoS values to a forwarding queue.
Class of Service — Specifies the CoS priority tag values, where
zero is the lowest and 7 is the highest.
Queue — Defines the traffic forwarding queue to which the
CoS priority is mapped.
2
Define the queue number in the Queue field next to the required
CoS value.
3 Click Apply. The CoS value is mapped to a queue, and the device is
updated.