Adding Entries Into Address Tables - 3Com 3CBLSG48 User Manual

126 C C
HAPTER9: ONFIGURING
Adding Entries into
Address Tables
IP MAC A I
AND DDRESS NFORMATION
State — Displays a port table display based on the type of address.
Possible values are:
Static — Indicates the MAC Address is statically configured.
Dynamic — Indicates the MAC Address is dynamically
configured.
Port Index — Indicates Port Table number.
Aging Time —Indicates that the MAC address is aged out or not.
NOAGED — Indicates that the Address Table entry is not aged out.
AGING — Indicates that the Address Table entry is aged out.
The Address Table Add Page allows the network manager to assign MAC
addresses to ports with VLANs.
The monitor users have no access to this page.
To add Address Tables:
1 Click Monitoring > Address Tables > Add. The Address Table Add
Page opens.
Figure 66 Address Table Add Page