Removing SNMP
Traps
The SNMP Traps Setup Page contains the following fields:
Recipients IP Address — Defines the IP address to which the
■
traps are sent.
■
Community String — Defines the community string of the trap
manager.
■
Trap Version — Defines the trap type. The possible field values are:
SNMP V1 — Indicates that SNMP Version 1 traps are sent.
SNMP V2c — Indicates that SNMP Version 2 traps are sent.
2
Define the relevant fields.
3
Click Apply. The SNMP Traps are defined, and the device is
updated.
The SNMP Traps Remove Page allows the network manager to remove
SNMP Traps.
Monitor users have no access to this page.
To remove SNMP traps:
1
Click Administration > SNMP > Traps > Remove. The SNMP
Traps Remove Page opens.
C
C
HAPTER 12:
ONFIGURING
S
147
NMP