CyberData 011280C Operation Manual page 70

2. On the Autoprovisioning page, you may enter values for the parameters indicated in
Note
Web Page Item
Disable Autoprovisioning
Autoprovisioning Server
Autoprovisioning Filename
Use tftp
Username
Password
Autoprovisioning autoupdate 
(in minutes)
Autoprovision at time (HHMMSS)
Autoprovision when idle
(in minutes > 10)
Operations Guide
14.
The question mark icon (
after the Toggle Help button is pressed
Table 2-14. Autoprovisioning Configuration Parameters
Prevent the device from automatically trying to download a configuration file. See
Section 2.5.12.1, "Autoprovisioning"
Enter the address of the provisioning server as a fqdn or IPv4 address in dotted
decimal notation.
The name of the configuration file. The default autoprovisioning filename is in the
format of <mac address>.xml.
Supported filename extensions are ".txt", and ".xml." The current filename is
denoted by an asterisk at the bottom of the
256 characters.
A file may have any name with an xml extension. If a file name is entered, the
device will look for the specified file name, and only that file.
The device will use TFTP (instead of http) to download autoprovisioning files.
The username used to authenticate with an autoprovisioning server. Leave this
field blank to disable authentication.
The password used to authenticate with an autoprovisioning server. Leave this field
blank to disable authentication.
The reoccurring time (in minutes) the device will wait before checking for new
autoprovisioning files. Enter up to 6 digits. A value of 0 will disable this option.
Note: To use the auto update options, enable the
Device Page
The time of day the device will check for a new autoprovisioning file. The time must
be 6 characters in length and in HHMMSS format. An empty value will disable this
option.
Note: To use the auto update options, enable the
Device Page
The idle time (in minutes greater than 10) after which the device will check for a
new autoprovisioning file. Enter up to 6 digits. A value of 0 will disable this option.
Note: To use the auto update options, enable the
Device Page
Click the Save button to save your configuration settings.
Click on the Reboot button to reboot the system.
Click on the Toggle Help button to see a short description of some of the web
page items. First click on the Toggle Help button, and you will see a question mark
( ) appear next to some of the web page items. Move the mouse pointer to hover
over a question mark to see a short description of a specific web page item.
Installing the InformaCast Enabled Paging Adapter
) in the following table shows which web page items will be defined
.
Description
for more information.
page (see Table 2-6).
page (see Table 2-6).
page (see Table 2-6).
931767B
Restore the Factory Default Settings
Autoprovisioning Page. Enter up to
Enable NTP setting on the
Enable NTP setting on the
Enable NTP setting on the
CyberData Corporation
63
Table 2-