Lights - BRP Lynx Commander 800R E-TEC 2018 Operator's Manual

MAINTENANCE PROCEDURES
WARNING
Do not use a higher rated fuse.
WARNING
If fuse has burnt out, source of mal-
function should be determined
and corrected before restarting.
See an authorized Lynx dealer for
servicing.
Fuse Location
The fuse box is located behind the front
seat upholstery at the LH front lower
portion of seat.
Refer to the decal inside the fuse box
SPECIFICATIONS
cover or the
for fuse identification.
To access the fuse box, carefully pull
seat upholstery out of the aluminum
extrusion by pulling the plastic strip
downwards and sideways at the same
time.
mmo2009-004-036_b
TYPICAL - PULL STRIP
______________
92
mmo2009-004-037_a
1. Fuse box
Close upholstery by pushing the strip
back in the aluminium extrusion.

Lights

section
Headlights Bulb Replacement
NOTICE
portion of an halogen bulb with bare
fingers, it shortens its operating life.
If glass is touched, clean it with iso-
propyl alcohol which will not leave a
film on the bulb.
1. By inserting a small screwdriver in
the slots (on both sides), release
multifunction gauge locking tabs.
619900929-019_a
1. Multifunction gauge
2. RH slot
2. Gently remove the multifunction
gauge from the console and set
aside.
Never touch the glass