BRP Lynx Commander 800R E-TEC 2018 Operator's Manual page 46

mmo2007-009-066_m
NOTE: Display will flash for approxi-
mately 5 seconds, then will return to
the previously selected mode if display
is not changed.
Push SET (S) button to select vehicle
average speed (AVR_SPD) mode.
mmo2007-009-066_n
1. Vehicle average speed (AVR_SPD) mode
Push the MODE (M) button to confirm
selection or wait 5 seconds.
mmo2007-009-066_o
To reset, push the MODE (M) to select
mode.
CONTROLS, INSTRUMENTS AND STANDARD EQUIPMENT
mmo2007-009-066_m
Push and hold the SET (S) button within
5 seconds to reset.
mmo2007-009-066_w
Gauge Setup
Clock Setting
NOTE: This clock diplays in the
24-hour format only.
Press the SET (S) button to select clock
mode.
mmo2007-009-066_p
1. Clock mode
Press and hold the SET (S) button to ac-
tivate clock set-up.
_______________
43