BRP Lynx Commander 800R E-TEC 2018 Operator's Manual page 42

H) Altitude
Displays vehicle approximate altitude
above sea level calculated from the
barometric pressure.
NOTE: Altitude displayed is rounded
off every 100 meters (gauge set in
metric) or 200 feet (gauge set in impe-
rial units).
To display vehicle altitude, proceed as
follows.
Press the MODE (M) button to select
display 2.
mmo2007-009-066_m
While display is flashing, press the SET
(S) button to select altitude mode.
mmo2007-009-066_k
The following symbol appears when al-
titude mode is selected.
mmo2008-003-023
ALTITUDE MODE
Press the MODE (M) button to confirm
selection or wait 5 seconds.
CONTROLS, INSTRUMENTS AND STANDARD EQUIPMENT
mmo2007-009-066_o
I) Heated Grips Heating
Intensity
Bar gauge that indicates heating inten-
sity.
NOTE: There are nine intensity set-
tings. When released, display will re-
turn to engine coolant temperature (if
equipped).
Refer to
more details.
mmo2007-009-043_a
HEATED GRIPS
1. Operating range
J) Heated Throttle Lever
Heating Intensity
Bar gauge that indicates heating inten-
sity.
Bar gauge will be displayed instead
of the fuel level with the activation of
the heated throttle lever switch. There
are nine intensity settings. When re-
leased, display will return to fuel level.
Refer to
SWITCH
_______________
HEATED GRIPS SWITCH
HEATED THROTTLE LEVER
for more details.
for
39