Engine Cut-Off Switch; Emergency Engine Stop Switch - BRP Lynx Commander 800R E-TEC 2018 Operator's Manual

CONTROLS, INSTRUMENTS AND STANDARD EQUIPMENT
mmo2009-005-006_a
TYPICAL — ENGAGE MECHANISM
Step 1: Apply and hold regular brake
Step 2: Lock brake lever using parking brake
lever
To Release Parking Brake
Squeeze brake lever. Parking brake
lever will automatically return to its
original position. Always release park-
ing brake before riding.

5) Engine Cut-Off Switch

The engine cut-off switch is located to
on the LH side of console.
The tether cord cap must be securely
snapped to the engine cut-off switch
to allow vehicle operation.
NOTE: After engine starting, 2 short
beeps should be heard if a pro-
grammed D.E.S.S. key (tether cord
cap) is correctly snapped on engine
cut-off switch. If another beep code
is heard, refer to
TEM
for D.E.S.S. malfunction codes
information.
WARNING
Always attach the tether cord eye-
let to clothing before starting the
engine.
Pulling the tether cord cap from the
engine cut-off switch shuts the engine
off.
______________
30
MONITORING SYS-
D.E.S.S. (Digitally Encoded Security
System)
The tether cord cap has an integrated
D.E.S.S. key to provide you and your
snowmobile with the equivalent secu-
rity of a conventional lock key.
The D.E.S.S. key contains an electronic
chip which features a unique perma-
nently memorized digital code.
Your authorized Lynx dealer has pro-
gramed the D.E.S.S. of your snowmo-
bile to recognize the D.E.S.S. key in the
tether cord cap to allow vehicle opera-
tion.
If another tether cord is used without
programming the D.E.S.S., the engine
will start but will not reach drive pulley
engagement speed to move vehicle.
Make sure the tether cord cap is free of
dirt or snow.
D.E.S.S. Flexibility
The D.E.S.S. of your snowmobile can
be programmed by your authorized
Lynx dealer to accept up to 8 different
keys.
We recommend the purchase of ad-
ditional tether cords from your au-
thorized Lynx dealer. If you have
more than one D.E.S.S.-equipped
Lynx snowmobile, each can be pro-
grammed by your authorized Lynx
dealer to accept the other vehicles
D.E.S.S. keys.
6) Emergency Engine
Stop Switch
The emergency engine stop switch is
located on the RH side of handlebar.
Push-pull type switch.
To stop the engine in an emergency,
select OFF position (down) and simul-
taneously apply the brake. To restart,
button must be at the ON position (up).