Preseason Preparation - BRP Lynx Commander 800R E-TEC 2018 Operator's Manual

PRESEASON PREPARATION

ENGINE
FUEL SYSTEM
DRIVE SYSTEM AND
BRAKE
STEERING SYSTEM
SUSPENSION
ELECTRICAL SYSTEM
______________
98
PRESEASON PREPARATION
Inspect engine rubber mounts
Check exhaust system condition and check for leaks
Tighten exhaust manifold screws or nuts to specified torque
Inspect cooling system cap, hoses and clamps and check for
leaks
Check coolant density
Inspect crankshaft PTO seal
Inspect fuel lines and connections
Inspect throttle cable
Inspect drive belt (adjust at every drive belt replacement)
Clean and visually inspect drive pulley
Clean and inspect driven pulley
Inspect, adjust and align track
Change gearbox oil
Check brake fluid level
Inspect brake hose, pads and disk
Inspect steering mechanism
Inspect skis and runners
Inspect front suspension
Inspect rear suspension (including stopper straps and slider
shoes)
Charge battery
Adjust headlight beam aiming