Supports For Equipment; Ram Mount; Snow Melting Bottle - BRP Lynx Commander 800R E-TEC 2018 Operator's Manual

7) Supports for
Equipment
619900929-023_b
TYPICAL - BEHIND WINDSHIELD
1. Support for equipment
619900929-015_a
INSIDE THE STORAGE COMPARTMENT
1. Support for equipment (equipment not
provided with the snowmobile)
619900929-014_a
INSIDE THE STORAGE BOX
1. Support for equipment
† RAM Mount is a trademarks of National Products Inc.
619900929-024_a
ON REAR BUMPER
1. Support for equipment

8) RAM Mount

A multifunction support that can be
used for various pieces of equipment.

9) Snow Melting Bottle

For water needs when in remote areas.
To access the snow melting bottle,
open the lower LH side panel. See
procedure in this section.
Fill the bottle with clean snow and in-
stall it on its support. The heat in the
engine compartment will cause the
snow to melt.
The cap can be used as a cup.
Secure the bottle using the rubber
latch.
_______________
SPECIAL EQUIPMENT
†
61