Infrared Light; Blackout Light Support - BRP Lynx Commander 800R E-TEC 2018 Operator's Manual

619900929-032_a
1. Lower retaining strap
3. Use the plastic tabs to hook the re-
taining straps to the windshield.
619900929-033_a
1. Retaining strap hooked

2) Infrared Light

619900929-021_a
1. Infrared light
The infrared light is enabled only when
the vehicle lights are in the black out
BLACK OUT MODE
mode, refer to
this section.
To operate the infrared light, use the
ON/OFF switch located on the con-
sole. Refer to
SWITCHES
To select HI or LOW, use the
LIGHTS DIMMER SWITCH
MULTIFUNCTION SWITCH
on the LH handlebar.

3) Blackout Light Support

Intended to install a blackout light as
needed.
619900929-008_a
1. Blackout light support - light not included.
A connector is provided for connecting
a blackout light.
619900929-022_a
1. Blackout light connector
A switch is already installed in the con-
sole to operate a blackout light. Refer
SPECIAL EQUIPMENT SWITCHES
to
in this section.
in
_______________
SPECIAL EQUIPMENT
SPECIAL EQUIPMENT
in this section.
HEAD-
in the
located
57