Technical Information Labels - BRP Lynx Commander 800R E-TEC 2018 Operator's Manual

Technical Information Labels

619900929-103_b
516003888
LABEL 1 - ON SUSPENSION RAIL
NOTICE
Drive pulley bolt recommended torque
85-92 lbf·ft / 115-125N·m
Not applying the recommended torque may result in a major failure of the drive
pulley and the engine.Refer to the shop manual for the complete assembly procedure
EN-516005503A-DEC
LABEL 2 - ON PULLEY GUARD
516003925
LABEL 3 - ON GEARBOX
________
SAFETY INFORMATION
IMPORTANT ON-PRODUCT LABELS
516003918
LABEL 4
The engine of this snowmobile has been developed The engine of this snowmobile has been developed
and validated using the BRP XPS approved lubricant. and validated using the BRP XPS approved lubricant.
BRP recommend the use of its XPS approved BRP recommend the use of its XPS approved
lubricant or equivalent. lubricant or equivalent.
Damages caused by oil which is not suitable for this Damages caused by oil which is not suitable for this
engine may not be covered by the BRP limited warranty. engine may not be covered by the BRP limited warranty.
See the operator's guide. See the operator's guide.
EN-516008613-DEC_a
LABEL 5 - ON OIL RESERVOIR
________
23