Special Equipment Switches - BRP Lynx Commander 800R E-TEC 2018 Operator's Manual

SPECIAL EQUIPMENT
4) Special Equipment
Switches
619900959-204_a
SWITCHES
1. Black out mode
2. Power outlets (NATO type)
3. Power outlets (NATO type) pilot lamp
4. Blackout light
5. Infrared light
6. Hands heater
7. Thumbs heater
1. The black out mode turns OFF:
– Headlights
– Taillight
– Brake light
– Multifunction gauge
– Beeper
NOTICE
While in the black out
mode, the multifunction gauge does
not transmit information or alarms
to the operator about the engine
temperature or injection oil level.
NOTE: The use of the black out mode
can generate a fault code.
2. Used to turn ON or OFF the power
outlets (NATO type).
3. Illuminates when the power outlets
(NATO type) are ON.
4. Used to turn ON or OFF the blackout
light (not provided with the snowmo-
bile).
5. Used to turn ON or OFF the infrared
INFRARED LIGHT
light. See
section for details.
______________
58
6. Used to turn ON or OFF the hands
heater on blackout mode.
7. Used to turn ON or OFF the thumbs
heater on blackout mode.
in this