Table of Contents
Advertisement
Operational Instructions and Function Adjustment
Power-on/off
Turn on the power switch: Press the IO power button. When the button is in the I state, the power
switch is turned on, and the monitor is powered on. Turn off the power switch: Press the IO power
button. When the button is in the O state, the power switch is turned off, and the monitor is powered
off.
Note
If you do not need to use the monitor for a long time, turn off the power and disconnect the monitor
from the power socket.
Power Indicator Status
The power indicator indicates the power switch statuses by different colors.
If the green power indicator is on, the power is turned on and the monitor works normally.
If the power indicator is off, the power is turned off and the monitor is shut down.
Breath Indicator Status
The breath indicator statuses indicate different monitor statuses.
If the breath indicator is off, the monitor works normally.
Breathing light steady on: no signal
Button Locking/Unlocking
To avoid misoperation, buttons can be locked and unlocked. Before using a button, you must unlock
the button first. Unlock a button: When a button is locked, press for 3s. The button is unlocked and
available after its indicator color turns white.
Lock a button: When a button is unlocked, press for 3s. The button is locked and not available after its
indicator is off.
Timeout locking: When a button is unlocked and is not operated in 120s, the system automatically
locks the button and the button indicator is off.
Shortcut Menu Operation
Mode Selection
The following modes are available in the power-on state:
Option
Definition
Factory
The optimal display mode preset in the factory
DICOM
Compliant with DICOM Part 14
User1
Compliant with Gamma, with support for custom parameter settings
User2
Compliant with Gamma, with support for custom parameter settings
User3
Compliant with Gamma, with support for custom parameter settings
16
Advertisement
Table of Contents
