FIRMWARE DOWNLOAD
EWS (Embedded Web Server) mode
Program (firmware) for this machine is upgraded by connecting to a PC through a
Network. A Command to upgrade the program must be entered.
You must save the correct firmware file to the PC.
1. Print out the Configuration page for back up the data and setting.
2. Download the Firmware on the PC.
NOTE: Make sure to download both the 'Printer Firmware' and 'Network
Firmware' if you want to upgrade both.
3. Access the "EWS" with the correct IP address.
4. Select 'Maintenance' as shown below.
5-2
20 July 2005
G144S901.TIF