BYPASS TRAY UNIT AND FEED ROLLER
3.11 BYPASS TRAY UNIT AND FEED ROLLER
Remove the following before you remove the bypass tray and feed roller.
: Front Cover
: Rear Cover
: Middle Cover
: Top Cover
: Left and Right Side Cover
3.11.1 BYPASS TRAY UNIT
[A]
[B]
1. Disconnect 1 x for the MP solenoid [A] and 1 x for the MP sensor [B].
2. Remove the 4 x . Then remove the by-pass assembly. (make sure to thread
the cables through the frame).
3. Remove the 2 x from the feed bracket [D]. Then remove it from the machine.
[C]
G144R038.WMF
3-30
20 July 2005
[D]
G144R039.WMF