Table of Contents
Advertisement
SAFETY PECAUTIONS
TOXIC MATERIALS
This product contains toxic materials that could cause illness if ingested.
1. If the LCD control panel is damaged it is possible for the liquid inside to leak.
This liquid is toxic and contact with skin should be avoided. Wash any splashes
from eyes or skin immediately and contact your doctor if you get some liquid on
your skin. See a doctor immediately if the liquid gets into the mouth or is
swallowed.
2. Please keep toner cartridges away from children. The toner powder contained
in the toner cartridge may be harmful and if swallowed you should contact a
doctor.
ELECTRIC SHOCK AND FIRE SAFETY PRECAUTIONS
Failure to follow the following instructions could cause electric shock or potentially
cause a fire.
1. Use only the correct voltage. Failure to do so could damage the printer and
potentially cause a fire or electric shock.
2. Use only the power cable supplied with the printer. Use of an incorrectly
specified cable could cause the cable to overheat and potentially cause a fire.
3. Do not overload the power socket. This could lead to overheating of the cables
inside the wall and could lead to a fire.
4. Do not allow water or other liquids to spill into the printer. This can cause
electric shock. Do not let paper clips, pins or other foreign objects to fall into the
printer. These could cause a short circuit leading to an electric shock or fire
hazard.
5. Never touch the plugs on either end of the power cable with wet hands. This
can cause electric shock. Remove the power plug from the wall socket when
you service the printer.
6. Use caution when you insert or remove the power connector. The power
connector must be inserted completely. Otherwise a poor contact could cause
overheating and lead to a fire. When removing the power connector grip it
firmly and pull.
7. Do not allow the power cable to become twisted, bent sharply round corners.
Do not place objects on top of the power cable. If the power cable is damaged
it could overheat and cause a fire. Exposed cables could cause an electric
shock. Replace a damaged power cable immediately. Do not reuse or repair
the damaged cable. Some chemicals can attack the coating on the power
cable, weakening the cover or exposing cables causing fire and shock risks.
Advertisement
Table of Contents
