Table of Contents
Advertisement
8. Ensure that the power sockets and plugs are not cracked or broken in any way.
Repair such defects immediately. Take care not to cut or damage the power
cable or plugs when moving the machine.
9. Use caution during thunder or lightening storms. Disconnect the machine from
the power source when such weather conditions are expected. Do not touch
the machine or the power cord if it is still connected to the wall socket in these
weather conditions.
10. Avoid damp or dusty areas. Install the printer in a clean well-ventilated location.
Do not position the machine near a humidifier. Dampness and dust build up
inside the machine can lead to overheating and cause a fire.
11. Do not position the printer in direct sunlight. This will cause the temperature
inside the printer to rise possibly leading to the printer failing to work properly
and in extreme conditions could lead to a fire.
12. Do not insert metal objects into the machine through the ventilator fan or other
part of the casing. This could make contact with a high voltage conductor inside
the machine and cause an electric shock.
HANDLING PRECAUTIONS
The following instructions are for your own personal safety, to avoid injury and so
as not to damage the printer
1. Ensure the printer is installed on a level surface, capable of supporting its
weight. Failure to do so could cause the printer to tip or fall.
2. Do not catch you fingers in the rollers, gears and fans.
3. Do not place any small metal objects, containers of water, chemicals or other
liquids close to the printer. This can cause damage, shock or fire if spilled into
the machine.
4. Do not install the machine in areas with high dust or moisture levels, beside
open windows or close to a humidifier or heater.
5. Do not place candles, burning cigarettes, etc on the printer.
Advertisement
Table of Contents
