Table of Contents
Advertisement
LASER SCANNING UNIT
[B]
3. Unplug 2 x [C] as shown above. Then remove the laser scanning unit [B].
NOTE: Do not touch the plastic shield of the laser scanning unit. Clean with a dry
tissue if you touch, or, if dust gets on the plastic shield.
NOTE: The screw slots on the laser scanning unit are numbered. Use the following
order when you disassemble/reassemble it.
1) Disassemble: 4-3-2-1
2) Reassemble: 1-2-3-4
[C]
G144R028.WMF
3-26
20 July 2005
Advertisement
Table of Contents
