Table of Contents
Advertisement
SOFTWARE PROBLEMS
4.10.2 PRINTER DOES OPERATE CORRECTLY 2
Description: After receiving the print command there is either no response or the
print speed is low. Incorrect machine set-up and not printer malfunction is the
cause of this condition.
Description
Not enough free hard disk space to
accommodate temporary work files created
during printing.
Printer error occurs even if there is enough
space in the hard disk.
Parallel port related problems in the CMOS
set-up.
System needs to reboot to print.
'Insufficient Printer Memory' message means
there is a hard disk space problem rather than
a printer RAM problem. In this condition,
provide more space on the hard disk with the
disk utilities program.
Make sure the connection between the cable
and printer port is correct. Make sure the port
settings in CMOS are correct if you use the
parallel port.
Select ECP for the printer port. SPP and
normal modes support 8-bit data transfer.
ECP mode supports 12-bit data transfer.
The cable of printer driver may be defective if
regular fonts do not get printed. At this time
turn off the PC and reboot the system. If the
problem stays, double click the printer icon in
my computer. Replace the cable if the regular
fonts are still not printed.
4-30
20 July 2005
Solution
Advertisement
Table of Contents
