20 July 2005
3.9 DRIVE UNIT
Remove the following before you remove the drive assembly.
: Front Cover
: Rear Cover
: Top Cover
: Left and Right Side Cover
1. Unplug 1 x from the drive assembly board [A].
2. Remove the 6 x (white screws) and 2 x ground wires. Then remove the drive
assembly board [A].
NOTE: The screws and the screw slots on the drive assembly board are
numbered. Use the order shown on the board when you
disassemble/reassemble it.
[A]
3-27
DRIVE UNIT
G144R029.WMF