Clearing Paper Jams; Jam2 (Paper Exit Area) - Aficio CM-P1 Service Manual

CLEARING PAPER JAMS

4.2 CLEARING PAPER JAMS
Paper can get jammed under the following the conditions.
• The tray is loaded incorrectly or overfilled.
• The tray has been pulled out during a print job.
• The front cover has been opened during a print job.
• Incorrect paper has been used.
The On Line/Error LED on the control panel lights red if a paper jam occurs. Find
and remove the jammed paper. Look inside the printer if no paper visible. Do not
use tweezers or other sharp metal tools to remove jammed paper.
NOTE: Make sure you remove all paper fragments from the machine if the paper
tears when you remove it from the machine. Otherwise a jam will occur
again

4.2.1 JAM2 (PAPER EXIT AREA)

Do the following procedure to solve this paper jam type.
1. Pull the paper straight out if paper gets jammed when it exits to the output tray.
Do not continue to pull the paper if there is resistance and the paper does not
move. In this condition, go to the next step.
4-4
20 July 2005
G144T005.WMF