Table of Contents
Advertisement
26 April, 2002
5. SERVICE TABLES
5.1 SERVICE PROGRAM MODE
!
CAUTION
Before accessing the service menu, do the following:
Confirm that there is no print data in the printer buffer (the Data In LED
must not be lit or blinking).
If there is some data in the buffer, wait until all data has been printed.
5.1.1 ENABLING AND DISABLING SERVICE PROGRAM MODE
On Line
Cancel
Entering the Service Mode
To enter the service mode, press the "Up/Down arrow" keys together for about 5
seconds, then press the right arrow key.
NOTE: 1) The machine automatically goes off line when you enter the service
mode.
2) While the service mode is activated, the Online LED does not go out.
Menu
#
Enter
Power
Error
5-1
SERVICE PROGRAM MODE
Data In
G082S900.WMF
Advertisement
Table of Contents
