Switching Video, Usb; Disabling Video, Usb - Tripp Lite B162-100-POE Owner's Manual

11. CLI Commands
11.4.3 Switching Video, USB, RS-232 and/or IR Paths
Use this command to switch video, USB, RS-232 and/or IR transmission paths. To use this function, type the command
in this format: sw + i<port> + all | video | usb | serial | ir + o<port> + \r\n
Control
i<port>
o<port>
all
video
usb
serial
ir
\r\n
Examples:
• To switch the video path of a B162-001-POE transmitter with the ID of 3 to a B162-100-POE receiver with an ID of 4,
type sw i3 video o4
• To switch the USB path of a B162-001-POE transmitter with the ID of 1 to a B162-100-POE receiver with an ID of 6,
type sw i1 usb o6
11.4.4 Disabling Video, USB, RS-232 and/or IR Paths
Use this command to disable video, USB, RS-232 and/or IR transmission paths for the specified B162-100-POE receiver. To use
this function, type the command in this format: sw + o<port> + all | video | usb | serial | ir + off + \R\N
Control
o<port>
all
video
usb
serial
ir
\r\n
Example:
To disable the video, USB, RS-232, and IR paths for a B162-100-POE receiver with an ID of 4, type sw o4 all off
Description
Indicates the device ID of the input device (B162-001-POE).
Indicates the device ID of the output device (B162-100-POE).
Stands for all transmission paths, including video, USB and IR
of the specified transmitter.
Stands for video path of the specified transmitter.
Stands for USB path of the specified transmitter.
Stands for RS-232 path of the specified transmitter.
Stands for IR path of the specified transmitter.
Ends the command.
Description
Indicates the device ID of the output device (B162-100-POE).
Stands for all transmission paths, including video, USB and IR
of the specified receiver.
Stands for video path of the specified receiver.
Stands for USB path of the specified receiver.
Stands for RS-232 path of the specified receiver.
Stands for IR path of the specified receiver.
Ends the command.
45