Apply/Auto Apply; Assigning Sources Using Dvoe Manager - Tripp Lite B162-100-POE Owner's Manual

9. Management

9.4.1 Apply/Auto Apply

If you wish to apply settings as you configure them, check Auto Apply.
Alternatively, if you wish to manually apply the settings, uncheck Auto Apply and use the Apply button. The button will light up
to show a change was made.

9.5 Assigning Sources Using DVOE Manager

Follow the steps below to assign input sources using DVOE Manager:
1. On the main screen, identify the source you wish to be assigned in the Source List and the preview video walls/receivers.
2. Select and drag the source to the preview video walls/receivers.
3. When there is a display issue from the connected receiver, the specific receiver will be indicated in red from the preview.
21