Tripp Lite B162-100-POE Owner's Manual page 19

9. Management
7. To manually assign IP addresses, follow the steps below:
a. From the Set ID/IP page, select Manual for IP Setup. This screen appears:
b. In the Transmitter and Receiver fields, type valid IP address ranges.
c. Click Refresh to start assigning IP addresses.
d. When the assignment is complete, DVOE Manager displays the assigned IP addresses.
8. To reassign device IDs, click and type a new ID for the target B162 device.
9. Click Done. The DVOE Manager's main screen appears.
Notes:
• For security reasons, Tripp Lite recommends changing the password at first login. For details on account settings, see
Account Settings.
• To access these settings again, click from the DVOE Manager's main screen, then click
19
.