Recovery Mode; Account Settings - Tripp Lite B162-100-POE Owner's Manual

10. System Settings

10.6.5 Recovery Mode

Four conditions require Recovery Mode:
1. When a firmware upgrade is manually aborted.
2. When the mainboard firmware upgrade fails.
3. When the I/O firmware upgrade fails.
4. The unit is not powered on for an unknown reason.
To set the B162 units to recovery mode, do the following:
1. Press and hold the Prev (+) push button.
2. Power on the B162 units.

10.7 Account Settings

DVOE Manager contains two account levels: Administrator and User. The default passwords and privileges are detailed in
the table below:
Account Level
Administrator
User
To change the default password, click the gear icon from the main screen and then click the Account tab.
Default Password Privileges
password All settings
password Source assignment and B162-100-POE
receiver allocation on video wall layouts only
41