Tripp Lite B162-100-POE Owner's Manual page 23

9. Management
2. Assign a source for each of the B162-100-POE receivers.
a) Move the cursor to a receiver. A green arrow appears at the top right corner of the receiver preview window.
b) Click the green arrow. A dropdown menu appears.
c) From the dropdown menu, click Configuration. This window appears:
d) Click the Connected Tx dropdown arrow and select a Tx source.
e) Repeat steps 2a through 2d to assign sources for each of the receivers.
f) To reboot the B162 units, click the green arrow mentioned in step 2b, and click Reboot. This warning window appears:
23