Table of Contents
Advertisement
10. System Settings
10.6 Maintenance
The Maintenance tab allows you to upgrade device firmware, back up transmitter and receiver layouts and restore devices to
previously backed up settings.
10.6.1 Upgrading Device Firmware
To upgrade firmware, follow the steps below.
1. From the main screen, click the gear icon and click the Maintenance tab. The following screen appears. The Firmware Upgrade
section lists the detected transmitter and receiver devices and their firmware versions.
2. Click Choose File to locate a previously saved firmware file.
3. Click to uncheck any devices that do not require the upgrade.
4. By default, any upgrades that involve a version rollback will be ignored. To apply both upgrades and version rollbacks, uncheck
Check Firmware Version.
5. Click Upgrade to start upgrading.
10.6.2 Synchronizing All Devices
When you wish to add or replace devices, click Sync All for the system to recognize the added/replaced device.
39
Advertisement
Table of Contents
