System Settings; Overview; General Settings - Tripp Lite B162-100-POE Owner's Manual

10. System Settings

10.1 Overview

The System Settings page allows you to specify device date and time, configure settings of connected B162 devices, upgrade
device firmware and back up the DVOE Manager's settings.

10.2 General Settings

The General tab contains the date, time and panel lock settings.
To access the General tab, click the
• Date and time: Click and type the desired information and click Set to save the settings.
• Sync with computer time: If you wish to synchronize the time with the computer's time, check the checkbox and click Set.
• Pop-Up OSD: When enabled, the OSD will be displayed when switching video sources. The OSD will not be displayed when
disabled.
• Video Quality: Click to select a video quality for display.
• Panel Lock:
o Select Permanent to lock the panel control of all connected B162 devices. To unlock the panel of a single B162 device,
uncheck the Enable checkbox.
o Select Auto to automatically lock the panel control of all connected B162 devices when it idles for 1 minute. To unlock
the panel of a single B162 device, press and hold the Down (-) button on the top panel for 3 seconds.
• Installation Wizard: Click the plus-sign icon on the top right corner to open the installation wizard. For details, see Logging In
and Configuring DVOE Manager.
Click Apply for the settings to take effect on the connected B162 devices.
, from the main screen, and then click the General tab.
33