Table of Contents
Advertisement
The Windows Client
Configuring the Hotkeys
If you find the default Hotkey combinations inconvenient, you can configure them to any key
sequence of your liking by doing the following:
1. Highlight the Action, then Click Start
2. Key in the Function keys (one at a time). The key names appear in the Key field as you press
them.
3. When you have finished keying in your sequence, Click Stop
4. Click Set
5. Repeat for any other actions you wish to set up
Note: You can use the same function keys for more than one action, as long as the first key is
not the same. For example, you can use F1 F2 F3 for one action; F2 F1 F3 for another;
F3 F2 F1 for a third, etc.
Video Adjustment
Adjust the placement and the picture quality of the remote screen (as displayed on your local
monitor) with the Video Options function. Either click the Hammer icon on the OSD Control
Panel, or use the Adjust Video hotkeys (see p. 20) to do so. The following screen appears:
20
Advertisement
Table of Contents
