Batch Configuration - Tripp Lite B162-100-POE Owner's Manual

10. System Settings

10.5 Batch Configuration

A batch configuration option is available for both Transmitters and Receivers. It appears on the top right corner of the page as
Quick Configuration. If you wish to adjust a particular setting for a group of devices, do the following:
1. Click Quick Configuration for a dropdown menu.
2. Select a setting you wish to configure. The available options for the dropdown menu will depend on whether you're in
the Transmitter or Receiver settings. The interface will allow you to select which devices you wish to configure.
3. Check the devices you wish to configure or, if you wish to select all the devices on the list, check Select All (on the
top left-hand corner) and click Next. The Quick Configure window will appear and you can see each device's status.
A dropdown menu is available at the bottom of the window for the configuration.
4. Select the desired setting and click Apply to apply the setting to all the devices.
38