Software Setup; Computer Requirements; Software Installation; Drive Selection - Servotronix ServoStudio stepIM Reference Manual

Software Setup

2 Software Setup
2.1

Computer Requirements

For proper graphic display of ServoStudio, the following is required.

Screen resolution 1280x800 (recommended).
Minimal resolution is 1024x768.

Windows 7 Display settings must set to Smaller – 100% (Default).
2.2

Software Installation

1. Download ServoStudio software from the Servotronix website or contact
Technical Support.
2. Install ServoStudio software on the host computer.
3. When installation is complete, start ServoStudio from the Windows Start
menu or the shortcut on your desktop.
2.3

Drive Selection

When ServoStudio is first activated after installation, it may prompt you to select
the drive you are using.
Figure 2-1.
After installation, the selected drive can be changed through the Drive in Use
option at the top of screen.
8
Drive Selection
ServoStudio Reference Manual
stepIM